Stronghold LA GARD 702 ComboPlus

Stronghold LA GARD 702 ComboPlus

The LA GARD 702 ComboPlus is the upgraded replacement for the industry-leading LA GARD 33E and 39E, which have secured commercial safes, ATMs and vaults worldwide for over 40 years. It is a multi-user electronic safe lock with four main programmable features: Time Delay, Dual Combination, Duress (Silent Alarm), and Remote Lock Out. It uses a 2-digit user ID with a 6–9 digit combination, giving a minimum of 1,000,000 possible permutations. Powered by 2 × 9V batteries housed in the keypad.

Key Features

Time Delay

Set a delay period of 0–99 minutes with a 1–60 minute open window. Prevents instant opening under coercion.

Dual Combination

Requires two authorised users to enter their codes before the lock will open.

Duress (Silent Alarm)

Sends a silent alarm under coercion. Requires an external Alarm Box.

Remote Lock Out

Disable opening remotely when required. Requires an external Alarm Box.

LA GARD 702 ComboPlus

Basic Operation — Opening the Lock

  1. Press 0 + 1 (your 2-digit user ID)
  2. Enter your combination (default: 1-2-3-4-5-6)
  3. Press Enter

ⓘ Valid: 3 short high beeps + 3 green flashes, displays "Lock Open". Invalid: 3 short low beeps + 3 red flashes, displays "Invalid". If Dual Combination is active, a second authorised user must also enter their ID and combination.

The LA GARD 702 ComboPlus .2

Changing Your Combination

⚠️ Always perform with the safe door open. Test the new code 3 times before closing.

  1. Press # 6 2
  2. Enter your current ID + combination, press Enter
  3. Enter your new combination, press Enter
  4. Re-enter the new combination to confirm, press Enter

User Management (Manager Only)

All programming uses # commands followed by your ID + combination and Enter. Always perform with the safe door open.

Command Function
5 0Add a user: new User ID + initial combination + privileges
5 4Disable / re-enable a user
5 5Change user privilege (Open, Audit, Time Delay Override, etc.)
5 6Delete a user
5 7Reset a user code

Power & Battery

  • 2 × 9V Alkaline (Duracell or Energizer recommended) — both batteries required
  • Battery life: approximately 1 year
  • Low battery warning: repeated beeps during opening + icon on the display
  • Non-volatile memory: codes, settings & audit trail retained during battery replacement
  • Emergency power: hold a fresh 9V battery against the external contacts on the keypad while entering your code

Technical Specifications

Code length6 digits (configurable 6–9)
User capacity29 (1 Manager + 28 Users)
Permutationsminimum 1,000,000
Time Delay0–99 min, 1–60 min open window
Audit Trail500 events, downloadable via PC Link
Bolt optionsSwing / Square / Spring

Manuals & Video Guides

Shopping Cart
Scroll to Top