Stronghold SafeLogic Basic Direct Drive Sale price

Stronghold SafeLogic Basic Direct Drive Sale price

A 2-user electronic safe lock from SECURAM Systems (Model EM-1701A EntryPad with DL-1701 D-Drive Deadbolt Lock Body). Motor-driven locking with automatic re-lock, a no-twist cable design for long-term durability, and a deadbolt drilled and tapped for bolt extensions or custom attachments.

Key Features

Motor-Driven Locking

Motor-driven locking action with automatic re-lock after 6 seconds.

No-Twist Cable Design

A no-twist cable design for long-term durability.

D-Drive Deadbolt

The D-Drive Deadbolt is drilled and tapped for bolt extensions or custom attachments.

Long Battery Life

Powered by a single 9V battery, delivering over 10,000 openings per battery.

SureLock Non-Volatile Memory

Codes are never lost during battery replacement. For indoor use.

Stronghold SafeLogic Basic Direct Drive Sale price

Basic Operation — Opening the Lock

Manufacturer default codes (must be changed immediately):
Manager Code: 1-1-1-1-1-1 · User Code: 1-2-3-4-5-6

1. Enter your 6-digit code
2. One beep confirms a valid entry — the motor automatically turns to the open position
3. Rotate the EntryPad to the right (clockwise) to retract the bolt and open the safe
4. After 6 seconds, the motor automatically re-locks
5. After closing the safe door, rotate the EntryPad to the left (counter-clockwise) to fully secure the lock

ⓘ If the entry is invalid, repeated beeps will sound and the lock will not open. Standby: to conserve battery, the system reverts to standby after 10 seconds of no key press (two short beeps). Wake the keypad by pressing any key.

Manager Programming

⚠️ Always perform all programming with the lock unlocked and the safe door open. The system will not accept a code set to six zeros. Verify any new code at least 3 times before closing the door.

Change the Manager Code:

1. Enter 0-0-0-0-0-0 (six zeros) — one beep

2. Enter the existing 6-digit Manager Code once — one beep
3. Enter the new 6-digit code — one beep
4. Re-enter the new 6-digit code — one beep confirms success
Action Steps (after entering program mode)
Add Press “1”, enter a 6-digit code, re-enter to confirm — one beep confirms success
Enable Press “1” — one beep confirms the User Code is enabled
Disable Press “2” — one beep confirms the User Code is disabled
Delete Press “3” — one beep confirms the User Code is deleted

User code – Add/Enable/Disable/delete

Wrong Entry Penalty

  • 4 consecutive invalid codes triggers a 5-minute lockout
  • During lockout, the unit beeps at 5-second intervals
  • Pressing keys during lockout does not restart or lengthen the penalty — it will not respond
  • Removing the battery interrupts the countdown, but it resumes when the battery is reinstalled until the full 5 minutes have elapsed
Stronghold SafeLogic Basic Direct Drive Sale price

Power & Battery

  • Battery: 1 × 9V standard Alkaline (Duracell or Energizer recommended)
  • Recommended replacement: annually
  • Low Battery Alert: 8 repeated beeps during an unlock operation — replace immediately
  • SureLock non-volatile memory: codes are retained during battery replacement

Specifications

Power Supply DC 9V (operating range DC 6V–11V)
Working Temperature 0°C to +49°C
Working Humidity <90%
Password Length 6 digits
Mechanical Life Span >10,000 cycles (UL) / >100,000 (SECURAM)
Environment For indoor use only
Shopping Cart
Scroll to Top